Emulate Pfsense LABS on 1 PC using GNS3 software without the need of purchasing real equipments
You are possibly looking to this page because youw ant to run Pfsense on GNS3 so you can do LABS. This is the right place 🙂
What you’ll learn
- Understand how to download and install GNS3 Software.
- Understand how to get Pfsense working on GNS3.
- Understand how to create WAN and LAN interfaces on GNS3.
- Connect Pfsense to the WAN and LAN interfaces.
Course Content
- Softwares for Emulation –> 3 lectures • 25min.
- LAN & WAN on Pfsense –> 3 lectures • 17min.
Requirements
You are possibly looking to this page because youw ant to run Pfsense on GNS3 so you can do LABS. This is the right place 🙂
Pfsense is a BSDÂ based software that you can use it for routing, firewalling, VPN, and much more things. In this course, I will show you step by step how you can have Pfsense installed on a single computer machine so you can emulate LABS. Additionally, I will show you how you can connect your real PC to that Pfsense virtual router so you can configure, and I will show you how you can connect the Pfsense router to the internet. All those steps will be shown on this course step by step so at the end you can deploy similar scenario on your PC.
The nice thing about this course is that you do not have to pay any penny to get this working. All you need to have is a PC and internet connection on that PC, then all softwares are free of charge and once you put them together you will have Pfsense running and you do practise LAB.
Of course on this course I am not going to make configuration on Pfsense because this is out of the topic for this course, but surely in future courses I will be showing you how you can configure Pfsense router and, trust me, everything will be covered 🙂
So if you want to know how to have Pfense working on GNS3, all you need to do is just to register in this course and I guarratee you that by end of the course you can have your Pfsense running on GNS3 on your PC!!!!